Choosing the right trailer hitch is about more than finding something that fits your truck. If you regularly tow a boat, camper, utility trailer, or equipment trailer, understanding trailer hitch classes can help you make a more informed decision.
Class 3, Class 4, and Class 5 trailer hitches are commonly found on SUVs and pickup trucks. However, they are not interchangeable, and their weight ratings and receiver sizes can differ depending on the specific model.
So, what is the difference between a Class 3, Class 4, and Class 5 trailer hitch? And how do you know which adjustable ball mount you need?
Let's break it down.
What Are Trailer Hitch Classes?
Trailer hitch classes categorize receiver hitches according to their design and rated towing capacities.
The five common receiver hitch classes range from Class 1 to Class 5. Higher classes generally accommodate heavier towing applications, but the actual rating depends on the specific hitch and vehicle.
For truck owners, the most relevant categories are often:
-
Class 3: Common on many SUVs, vans, and pickup trucks.
-
Class 4: Designed for higher-rated towing applications.
-
Class 5: Designed for certain heavy-duty and commercial-duty towing setups.
One important distinction: A trailer hitch class is not the same thing as receiver size. Receiver size describes the square opening where your ball mount slides into the hitch.
Class 3 vs. Class 4 vs. Class 5: Quick Comparison
The following figures are representative examples from CURT's published hitch-class specifications. They are not universal ratings for every manufacturer or vehicle.
| Hitch Class | Common Receiver Size | Representative GTW Rating | Representative TW Rating |
|---|---|---|---|
| Class 3 | 2 inches | Up to 8,000 lbs | Up to 800 lbs |
| Class 4 | 2 inches | Up to 10,000 lbs | Up to 1,000 lbs |
| Class 5 Xtra Duty | 2 inches | 16,000–17,000 lbs | 2,400–2,550 lbs |
| Class 5 Commercial Duty | 2.5 inches | 18,000–20,000 lbs | Up to 2,700 lbs |
Always check the exact receiver's label and manufacturer specifications. Ratings can vary by part number, installation, and towing configuration.
1. What Is a Class 3 Trailer Hitch?
A Class 3 trailer hitch is one of the most common receiver hitch categories for pickup trucks and SUVs.
Most Class 3 models use a 2-inch receiver opening and are designed for a wide range of everyday towing applications.
Depending on the specific vehicle and hitch rating, common uses include:
-
Utility trailers
-
Small and medium campers
-
Boat trailers
-
Cargo trailers
-
General recreational towing
A Class 3 receiver does not automatically mean every 2-inch ball mount is suitable for your setup.
You still need to verify the ball mount's shank size, hitch ball diameter, drop or rise, and weight ratings.
For many truck owners, a compatible 2-inch adjustable ball mount offers useful flexibility when switching between trailers with different coupler heights.
2. What Is a Class 4 Trailer Hitch?
A Class 4 trailer hitch is designed for higher-rated towing applications than a typical Class 3 setup.
Many Class 4 receiver hitches also use a 2-inch receiver opening.
This is an important detail because two hitches can have the same receiver size but different weight ratings.
Class 4 applications may include:
-
Larger utility trailers
-
Heavier boat trailers
-
Certain travel trailers
-
Equipment trailers
-
Other compatible bumper-pull towing applications
Before purchasing a ball mount, check the rating of the installed receiver rather than assuming its capacity from the opening size.
A 2-inch receiver only tells you the physical size of the opening. It does not tell you the maximum weight your complete towing system can safely handle.
3. What Is a Class 5 Trailer Hitch?
Class 5 trailer hitches are designed for certain heavy-duty and commercial-duty towing applications.
Unlike Class 3 and Class 4 receivers, Class 5 configurations can use either a 2-inch or 2.5-inch receiver, depending on the model.
Two common categories are:
Class 5 Xtra Duty
These models can use a 2-inch receiver and are designed for certain heavy-duty pickup truck applications.
Class 5 Commercial Duty
These models commonly use a 2.5-inch receiver and are designed for certain higher-capacity towing applications, including compatible heavy-duty truck configurations.
However, a Class 5 receiver does not automatically make every towing accessory suitable for heavy loads.
The ball mount, hitch ball, trailer coupler, vehicle, and other components must all meet the requirements of the actual towing setup.
4. Does Receiver Size Determine Hitch Class?
No. Receiver size and hitch class describe different characteristics.
The receiver size measures the inside opening of the square receiver tube.
The hitch class describes the receiver hitch's rated category and intended towing application.
For example:
-
Some Class 3 hitches use a 2-inch receiver.
-
Many Class 4 hitches also use a 2-inch receiver.
-
Class 5 hitches can use either 2-inch or 2.5-inch receivers.
This means you should never select a ball mount based only on the hitch class.
Instead, measure or verify the receiver opening installed on your vehicle.
If you are unsure which receiver size your truck has, read our guide: 2-Inch vs. 2.5-Inch Hitch Receiver: Which One Do You Need?
5. What Should You Check Before Buying a Trailer Hitch Ball Mount?
Once you know your receiver size and towing requirements, there are several other details to consider.
Receiver Compatibility
Your ball mount's shank must match the receiver opening or use only an adapter specifically approved for that combination.
GETEEN offers adjustable ball mounts for compatible 2-inch and 2.5-inch receivers.
Hitch Ball Size
The hitch ball must match the trailer coupler.
Common hitch ball sizes include:
-
1-7/8 inches
-
2 inches
-
2-5/16 inches
A larger ball is not automatically better. Always use the diameter specified by your trailer coupler manufacturer.
Required Drop or Rise
Your truck and trailer should connect at the appropriate height.
Measure the receiver height and trailer coupler height before selecting a ball mount.
GETEEN offers selected adjustable models with 5-inch and 7-inch drop configurations.
For a detailed explanation, read: How Much Drop or Rise Do I Need for a Trailer Hitch?
Gross Trailer Weight and Tongue Weight
Two important towing measurements are:
Gross Trailer Weight (GTW): The total loaded weight of the trailer.
Tongue Weight (TW): The downward force the loaded trailer applies to the hitch connection.
Never exceed the lowest applicable rating in your complete towing system.
This includes the vehicle, receiver, ball mount, hitch ball, trailer coupler, and any other applicable component.
6. Choosing the Right Adjustable Ball Mount for Your Truck
An adjustable ball mount is useful when you need to accommodate different trailer heights or coupler sizes.
GETEEN's adjustable trailer hitch collection includes:
-
Compatible 2-inch and 2.5-inch receiver options
-
Dual-ball and tri-ball configurations
-
Selected 5-inch and 7-inch drop options
-
Steel and aluminum models
A dual-ball design provides two hitch ball sizes, while a tri-ball design provides three. The right configuration depends on the trailers you actually tow.
You can explore the available options here:
Shop GETEEN Adjustable Trailer Hitches
For a more detailed comparison, see our guide: Dual-Ball vs. Tri-Ball Trailer Hitch: Which One Should You Choose?
Frequently Asked Questions
Is a Class 3 hitch enough for a pickup truck?
It depends on the pickup truck, trailer weight, receiver rating, and towing requirements. Many pickup trucks use Class 3 receivers, but not every truck or trailer combination is suitable for this class.
Is a Class 4 hitch stronger than a Class 3 hitch?
Class 4 receiver hitches are generally rated for higher towing loads than Class 3 models. However, always compare the actual specifications of the individual products.
Is a 2.5-inch receiver always Class 5?
No. Receiver size alone does not establish a hitch's class or rating. Verify the manufacturer's product identification and specifications.
Can I use a 2-inch ball mount in a 2.5-inch receiver?
Not automatically. The receiver and ball mount must have a compatible fit. Only use an appropriately rated, manufacturer-approved adapter if the specific setup allows it.
Does a Class 5 trailer hitch mean my truck can tow 20,000 lbs?
No. Your truck's manufacturer-rated towing capacity, payload, receiver, ball mount, hitch ball, trailer coupler, and other components all matter. The lowest applicable rating determines the limit.
Final Thoughts
Understanding trailer hitch classes makes it easier to compare towing equipment and avoid common compatibility mistakes.
Class 3, Class 4, and Class 5 receivers can serve different towing applications, but receiver size alone does not determine a safe towing setup.
Before choosing an adjustable ball mount, verify your receiver opening, hitch ball size, required drop or rise, and all applicable weight ratings.
At GETEEN, we believe dependable towing equipment should be straightforward to choose and practical to own.
Good Gear. No Guesswork.